Beatbot vs Aiper: Battery, Build Quality & Warranty Compared
Last updated: 16 July 2026 · Reviewed by the Poolbot UK product team
Beatbot and Aiper are both fully cordless, so the real differences come down to battery safety, navigation and warranty support rather than cables. Aiper is one of the newer cordless pool robot brands, with the Seagull Pro and Seagull SE as its main models — but the Seagull Pro has been the subject of a product recall over battery overheating and fire risk, reported by multiple independent pool-equipment review sites. Beatbot's AquaSense range uses AI-guided navigation with a multi-sensor camera system and backs every model with a 3-year warranty, including full machine replacement, through Poolbot's UK-based support. For buyers comparing cordless pool robots, battery safety and certification are worth checking carefully before you buy.
Shop the models in this comparison
Buy Sora 30 — £998Buy Sora 70 — £1,428Buy AquaSense 2 Ultra — £2,740Important safety note
Aiper's Seagull Pro has been the subject of a product recall over battery overheating and fire risk, reported by multiple independent pool-equipment review sites. If you're comparing cordless pool robots, battery safety and certification are worth checking carefully before you buy.
Beatbot AquaSense 2 Ultra vs Aiper Seagull Pro
| Beatbot AquaSense 2 Ultra | Aiper Seagull Pro | |
|---|---|---|
| Power | Cordless | Cordless |
| Cleans | Surface, waterline, floor, walls + water clarification | Floor and walls (Auto, floor-only, wall-only modes) |
| Waterline cleaning | Yes | Not a listed mode |
| Suction power | 5,500 GPH | Not published (quad-motor system) |
| Motors | 11 | 4 (quad-motor) |
| Runtime | Up to 10 hours surface cleaning | Up to 150 minutes (2.5 hours) |
| Navigation / AI | HybridSense™, 27+ sensors, 4K AI camera, full 3D mapping | Quad-motor navigation, 3 preset modes |
| Filtration | Dual filtration (4.0L + 3.7L) | Standard onboard capacity, manual emptying |
| Water clarification | ClearWater™ natural clarification included | Not offered |
| Safety certification | 3-year warranty, UK-authorised retailer | Subject to a reported battery safety recall (Seagull Pro) |
| Warranty | 3 years, full machine replacement, includes battery | 1–2 years (model dependent) |
| UK support | UK-authorised retailer (Poolbot) | Varies by retailer |
Why buyers choose Beatbot over Aiper
- 4K AI camera and 3D mapping. The AquaSense 2 Ultra's 27+ sensors and 4K AI camera build a real map of your pool — well beyond the Seagull Pro's preset-mode navigation.
- Longer runtime. Up to 10 hours per charge vs the Seagull Pro's 150 minutes.
- Water clarification built in. ClearWater™ natural clarification runs alongside physical cleaning — Aiper's range is cleaning-only.
- 3-year warranty including the battery. Given the reported recall on Aiper's Seagull Pro, Beatbot's battery-inclusive warranty and safety record are worth checking before you buy.
Which Beatbot should you choose? For 4K AI navigation and water clarification to match Aiper's premium positioning, the AquaSense 2 Ultra. For maximum runtime and self-cleaning filtration, step up to the AquaSense X. Browse the full range.
Beatbot Sora 30 vs Aiper Scuba S1 Pro
Aiper's Scuba S1 Pro (£821 RRP) is the closest Aiper model to Beatbot's Sora 30 (£998) on price — Aiper's entry Scuba S1 (£599 RRP) sits too far below to be a fair match. The S1 Pro brings real strengths (MicroMesh ultra-fine filtration, 11 sensors, WavePath 2.0 adaptive path planning), with 4,200 GPH suction — well below Sora 30's 6,800 GPH.
| Beatbot Sora 30 | Aiper Scuba S1 Pro | |
|---|---|---|
| Price | £998 | £821 (RRP) |
| Power | Cordless | Cordless |
| Cleans | Floor, walls, waterline | Floor, walls, waterline |
| Suction power | 6,800 GPH | 4,200 GPH |
| Filtration | Fine filter (70 micron) | MicroMesh ultra-fine filtration |
| Navigation | Multi-zone smart navigation | WavePath 2.0, 11 sensors |
| Runtime | Up to 180 minutes (3 hours) | Up to 240 minutes (Eco mode) |
| Warranty | 2 years (UK) | Not published — check with retailer |
At £177 more, Sora 30's edge is suction power — 62% higher than the S1 Pro's published figure. The S1 Pro runs longer per charge and has genuinely strong filtration and navigation for its price.
Beatbot Sora 70 vs Aiper Scuba X1 Pro
Aiper's Scuba X1 Pro (£1,450) is the closest Aiper model to Beatbot's Sora 70 (£1,428) on price. The X1 Pro brings real strengths — 360° mapping and MicroMesh filtration — with 6,600 GPH suction, close to Sora 70's 6,800 GPH. Sora 70 adds JetPulse™ water surface skimming, which the X1 Pro's published specs don't include.
| Beatbot Sora 70 | Aiper Scuba X1 Pro | |
|---|---|---|
| Price | £1,428 | ~£1,450 |
| Power | Cordless | Cordless |
| Cleans | Floor, walls, waterline, water surface (JetPulse™) | Floor, walls, waterline |
| Suction power | 6,800 GPH | 6,600 GPH |
| Navigation | SonicSense™ dual ultrasonic navigation | 360° mapping |
| Filtration | 6L filter basket | MicroMesh filtration |
| Warranty | 3 years, full machine replacement | Not published — check with retailer |
| UK support | UK-authorised retailer (Poolbot) | Varies by retailer |
At near-identical prices, this is a close call: the X1 Pro's 360° mapping and MicroMesh filtration are genuine strengths, and its suction is close behind Sora 70's. Sora 70's edge is water surface skimming, which the X1 Pro doesn't offer.
Beatbot vs Aiper Scuba X1 Pro Max
Aiper's flagship Scuba X1 Pro Max (£2,472) is a step up again — 8,500 GPH suction, 9 brushless motors and up to 300 minutes (5 hours) of runtime per charge, plus surface skimming. Its £2,472 price sits between Beatbot's AquaSense 2 Ultra (£2,740) and AquaSense 2 Pro (£1,948), closest to the Ultra. The AquaSense 2 Ultra still leads on runtime and adds AI camera mapping and water clarification that the Scuba range doesn't offer.
| Beatbot AquaSense 2 Ultra | Aiper Scuba X1 Pro Max | |
|---|---|---|
| Power | Cordless | Cordless |
| Suction power | 5,500 GPH | 8,500 GPH |
| Motors | 11 | 9 (brushless) |
| Runtime | Up to 10 hours surface cleaning | Up to 300 minutes (5 hours) |
| Navigation / AI | HybridSense™, 27+ sensors, 4K AI camera, full 3D mapping | Not published — no 4K camera mapping |
| Water clarification | ClearWater™ natural clarification included | Not offered |
Aiper's Scuba range wins on raw suction power. Beatbot wins on runtime, AI camera navigation and water clarification — worth weighing against how much suction your pool actually needs.
FAQs
Has Aiper had any safety recalls?
Yes — independent pool-equipment review sites have reported a recall on the Aiper Seagull Pro over battery overheating and fire risk. Always check current recall status and safety certifications before buying any cordless pool robot.
Does Beatbot offer AI navigation like a premium Aiper model?
The AquaSense 2 Ultra uses a 4K AI camera with 3D pool mapping and 27+ sensors — a more advanced navigation system than Aiper's preset-mode approach.
Can I leave my Aiper or Beatbot pool robot in the pool all the time?
No — like Beatbot, Aiper is cordless and battery-powered, so it needs removing from the pool to recharge between cleans rather than being left in permanently.
How does Aiper Scuba compare to Aiper Seagull?
The Scuba range (including the X1 Pro Max) is Aiper's higher-tier line with stronger suction (8,500 GPH) than the Seagull series, positioning it closer to Beatbot's AquaSense range.
Does Aiper Scuba have AI camera navigation like Beatbot?
No — Aiper's published specs for the Scuba range don't include a 4K AI camera or full 3D mapping like the AquaSense 2 Ultra.